This Wifi Module allows near real-time monitoring of inverter data and deliver right to your smart phone APP, anywhere in the world.
Energy Mate is a brand new inverter Wi-Fi monitoring mobile application available in for iOS and Android, replacing WatchPower / SolarPower APP. This APP monitors energy storage systems by providing near real-time information on the system’s running status and data changes through charts, energy flow charts, and lists. Within the APP, users can view the current operation status and detailed data of their energy storage system and access near real-time and historical data to monitor system performance from anywhere. This APP also integrates both SolarPower and WatchPower APP, and current users are encouraged to migrate to the new Energy-Mate.
Once the APP is downloaded to phone, users will need to follow a 2-step process for setup: user registration and network configuration. Please refer to links below for video demonstration.
*Internet connection from a router is required.
Current compatible Off-Grid/Hybrid models with Wifi Modules are as follows. Please note 4-pin RS232 cable required and inverters produced before September 2019 are NOT supported.
- 3624MT, 5648MT
- 1212GE, 2524GE
- LV5048, LV6048
- 2424LV-HS, 2424LV-MSD, all models in LV-MK series
- 5048MGX, 5048MS(64V), 5048MG
- All models in HSE/MSE/MSXE series
- 2424HSE1 , 2424MSE1
- 3024GK**, 5048GK**, 3024MK**, 5048MK**
- HV2-3048, HV2-5048, HV V2 6048T
- MPI 10K (only for models produced in 2021 or after)
- HV6048WP
- LV2424
Note:
*At this time each Wifi Module can only support one inverter.
**Due to hardware design GK/MK models must be produced after 2019 Sep to work with this device. Changing the RS232 cable alone to 4-pin will NOT enable compatibility with this device.
For more information, please refer to user manual:
- Energy-Mate WIFI APP user manual
- Energy-Mate Registration Video (step 1)
- Energy-Mate Network Config Video (step 2)
