logo

SPLIT PHASE LV SERIES – LV2424 / LV5048 / LV6048



  • The Split Phase LV series inverter family features inverters that can support 120V/240V split phase output which is the main power standard used in North American countries including US, Canada, Mexico, and Puerto Rico.  Split phase system is defined as having 2 x 120V hot wires (normally denoted as L1 and L2 and each hot wire is 120V in relation to the neutral wire), 1 neutral wire, and a ground wire.  By using the two opposite phase hot wires together 240V is created between L1 and L2.

    LV2424

    LV2424 is a max 2400w/24vdc inverter with 110/120V output and supports both 50Hz or 60Hz frequency.  By wiring at least 2 units of LV 2424 parallel, the system can create split phase output, as illustrated below.  Parallel kits are required on each unit and sold separately.  Maximum parallel operation supported by LV2424 is up to 9 units max and possible configurations include: single phase, split phase and 3-phase applicationsNote: split phase parallel is limited to 8 units max in total (4 max in each phase).

    LV5048 / LV6048

    LV6048, rated 6KW/48V, is a model capable of creating split phase output without the use of parallel.  These models can parallel up to 3 units, and from which one can configure system as 3-phase output 208V (phase to neutral).  Parallel kits are built-in.  LV5048 has been discontinued and replaced by LV6048.

    Along with a built-in MPPT solar charger and large utility charger, these split phase LV models offer excellent versatility and flexibility to expand and are ideal for off-grid / grid optional use.

    For more information, please download the catalogs at the tab page above or contact our sales office at sales@mppsolar.com.

    • Split Phase output possible (120V/240V), suitable for USA, Canada, Mexico and Puerto Rico markets
    • NEW! LV6048 (split phase ready): 6KW/48V output, in 120v single phase / 208V, 240V split phase / 208V 3-phase *parallel kits are built-in.
    • LV2424 (120v output).  *Requires minimum 2 units in parallel to create split phase (120V/240V), parallel kits sold separately
    • Grid Injection feature is available by feeding excess PV power to grid (LV2424 only) — *please check with your local authority for compliance
    • Stackable — parallel up to 9 units (for LV2424), max 3 units for LV5048 / LV6048
    • Single 80A max MPPT input (LV2424 only)
    • 2X dual MPPT trackers up to 160A combined (LV5048, LV6048 only)
    • Pure sine wave output
    • 50Hz & 60Hz support
    • Programmable parameters
    • Max up to 60A utility charging
    • Adjustable bulk & float charging voltage
    • Support either grid or generator input
    • Genset starter dry contact
    • Overload and short circuit protection
    • FREE monitoring software
    • LCD Display + LED indicators
    • RS232/USB communication interface

    Using Generator as AC-Input

    • Generator power is recommended to be 50% larger than the inverter rating to reduce chances of overload.
    • Inverter-generator is recommended due to its cleaner output than conventional generators.  Unsuitable generator output may be rejected by the inverter.

  • **For SolarPower software please contact our Sales team sales@mppsolar.com directly.


Language

MPP Solar Store is now ready.

X